【超频】新手必须保存的资料 EP45―UD3系+E8200超4G的BIOS设置
新手必须保存的资料 EP45-UD3系+E8200超4G的BIOS设置******************************
MB Intelligent Tweaker(M.I.T.)
******************************
Robust Graphics Booster ..............:
CPU Clock Ratio ......................:
x Fine CPU Clock Ratio................: +0.0
CPU Frequency ........................: 4.096GHz( 512X8)
********** Clock Chip Control ********
>>>>> Standard Clock Control
CPU Host Clock Control................:
x CPU Host Frequency(Mhz).............:
PCI Express Frequency(Mhz)............:
C.I.A.2...............................:
>>>>> Advanced Clock Control..........:
CPU Clock Drive.......................:
PCI Express Clock Drive...............:
CPU Clock Skew........................: [ 0ps]
MCH Clock Skew........................: [ 0ps]
******** DRAM Performance Control ********
Performance Enhance...................:
Extreme Memory Profile(X.M.P.)........:
(G)MCH Frequency Latch................:
System Memory Multiplier (SPD)........:
Memory Frequency(Mhz).....800.........: 1024
DRAM Timing Selectable (SPD)..........:
>>>>> Standard Timing Control
x CAS Latency Time................5...: [ 5]
x tRCD ...........................5...: [ 5]
x tRP.............................5...: [ 5]
x tRAS...........................18...:
>>>>> Advanced Timing Control.........:
x tRRD............................3...: [ 3]
x tWTR............................3...: [ 3 (11 in Windows)]
x tWR.............................6...: [ 5 (14 in Windows)]
x tRFC...........................52...:
x tRTP............................3...: [ 1 (4 in Windows)]
x Command Rate (CMD) .............0...: [ 2]
>>>>> Channel A Timing Settings.......:
x Static tRead Value.............10...:
x tRD Phase0 Adjustment...........0...: Auto
x tRD Phase1 Adjustment...........0...: Auto
x tRD Phase2 Adjustment ..........0...: Auto
x tRD Phase3 Adjustment...........0...: Auto
x Trd2rd(Different Rank)..........6...: Auto
x Twr2wr(Different Rank)..........6...: Auto
x Twr2rd(Different Rank)..........5...: Auto
x Trd2wr(Same/Diff Rank)..........8...: Auto
x DIMM1 Clock Skew Control (ps).......: Auto
x DIMM2 Clock Skew Control (ps).......: Auto
x DDR Write Training..................: Auto
>>>>> Channel A Driving Settings......:
x Driving Strength Profile............:
x Data Driving Pull-Up Level..........: Auto
x Cmd Driving Pull-Up level...........: Auto
x Ctrl Driving Pull-Up Level..........: Auto
x Clk Driving Pull-Up Level...........: Auto
x Data Driving Pull-Down Level........: Auto
x Cmd Driving Pull-Down level.........: Auto
x Ctrl Driving Pull-Down Level........: Auto
x Clk Driving Pull-Down Level.........: Auto
>>>>> Channel B Timing Settings.......:
x Static tRead Value.............10...:
x tRD Phase0 Adjustment...........0...: Auto
x tRD Phase1 Adjustment...........0...: Auto
x tRD Phase2 Adjustment ..........0...: Auto
x tRD Phase3 Adjustment...........0...: Auto
x Trd2rd(Different Rank)..........6...: Auto
x Twr2wr(Different Rank)..........6...: Auto
x Twr2rd(Different Rank)..........5...: Auto
x Trd2wr(Same/Diff Rank)..........8...: Auto
x DIMM1 Clock Skew Control (ps).......: Auto
x DIMM2 Clock Skew Control (ps).......: Auto
x DDR Write Training..................: Auto
>>>>> Channel B Driving Settings......:
x Driving Strength Profile............:
x Data Driving Pull-Up Level..........: Auto
x Cmd Driving Pull-Up level...........: Auto
x Ctrl Driving Pull-Up Level..........: Auto
x Clk Driving Pull-Up Level...........: Auto
x Data Driving Pull-Down Level........: Auto
x Cmd Driving Pull-Down level.........: Auto
x Ctrl Driving Pull-Down Level........: Auto
x Clk Driving Pull-Down Level.........: Auto
****** Motherboard Voltage Control ******
Voltage Types..........Normal...........Current
-----------------------------------------------
>>> CPU
Load-Line Calibration.................:
CPU Vcore..............1.27500V.......:
CPU Termination........1.200V.........:
CPU PLL................1.500V.........:
CPU Reference..........0.760V.........: [.76 (.7 when VTT is 1.2)]
>>> MCH/ICH
MCH Core...............1.100V.........:
MCH Reference..........0.760V.........: [.72]
MCH/DRAM Reference.....0.900V.........:
ICH I/O................1.500V.........:
ICH Core...............1.100V.........:
>>> DRAM
DRAM Voltage...........1.800V.........:
DRAM Termination.......0.900V.........:
Channel A Reference....0.900V.........:
Channel B Reference....0.900V.........:
******** Advanced BIOS Features ********
No-Execute Memory Protect.............:
CPU Enhanced Halt (C1E)...............:
C2/C2E State Support..................:
x C4/C4E State Support................: Disabled
CPU Thermal Monitor 2(TM2) ...........:
CPU EIST Function.....................:
Virtualization Technology.............:
Delay For HDD (Secs)..................: [ 0]
Full Screen LOGO Show.................:
Init Display First....................:
******** Integrated Peripherals ********
USB Keyboard Function.................:
USB Mouse Function....................:
USB Storage Function..................:
页:
[1]